The smart calculator for your solar system
Design your system in a minute, the way that suits you: “Automatic” with three questions, “Manual” where you choose the components and we check them, or “Advanced engineering” with every assumption open — and each section (load, panels, battery…) switches between automatic and manual on its own. A transparent engineering report made for Iraq's reality (outages and heat).
Loading the store stock (batteries and inverters)… you can start now.
Method: the Daily Energy BudgetWhat the system computes and what it does not — full transparency before you start
The system balances daily consumption, grid hours, solar production and battery capacity on the basis of 24 hours as one budget. Suitable for choosing equipment and quoting; it does not replace a PVSyst / Helioscope study or a technical site survey.
- Load = amps × volts (P = V × I) — continuous, or day/night (12 + 12 hours) with the inverter sized on the peak.
- Daily energy is split into the grid's share (by its hours) and the direct-sun share; the batteries carry the rest.
- Battery sizing: the battery's share ÷ inverter efficiency ÷ allowed usage ratio (25–35% reserve by tier) + a margin for low-sun days.
- Panel sizing: the energy outside grid hours ÷ sun hours, with the heat and dust margin (25% by default).
- Inverter: the load × a 2–3.5 safety factor by tier → the next standard size up (handles motor start-up).
- Sun hours (PSH) ≠ daylight hours — Baghdad's annual average ≈ 5.5, winter ≈ 4.5.
- It does not simulate daily clouds or the timing of each appliance; the hourly curve in the report is illustrative.
- Eight sections, one engine: each section (load, grid, sun, battery, inverter, panels, engineering settings, site) is automatic or manual on its own, and the three methods (automatic · manual · advanced engineering) are presets for them — they differ in what you control, not in the formulas.
To change a specific assumption (efficiency, heat margin, PSH, cable lengths) switch its section to “Manual” — or choose “Advanced engineering” to open them all — then recalculate to see the effect.
